2025 CUB west/east africa CM110-19
Engine Type: 110cc engine, 1 Cylinder, 4 Stroke, Air-Cooling，110cc/120cc/125cc
CM110-19
| Standard Configuration Technical Parameters | ||||||
| ITEMS | CM110-19 | CONTENTS | ||||
| Vehicle Parameters | VIN No. (The first 8 digits of VIN) | LTEXBJK0 | ||||
| Dimensions (L×W×H)（ mm） | 1950×720×1140 | |||||
| Wheelbase（ mm） | 1280 | |||||
| Minimum ground clearance（ mm） | 165 | |||||
| Seat height（ mm） | 780 | |||||
| Vehicle curb weight（kg） | ||||||
| Rated load mass（kg） | 150 | |||||
| Brake type (front/rear) | Disc/Disc | |||||
| Brake operation method (front/rear) Rim type (front/rear) | Hand operation/foot operation Spoke/spoke | |||||
| Tire size (front/rear) | 2.50-17 2.75-17Tubeless | |||||
| Tire pressure (front/rear) (kPa) | 225/250 | |||||
| Maximum speed | 95 | |||||
| Starting performance (s) | ≤15 | |||||
Accelerated performance(s) | start acceleration(s) | ≤13.8 | ||||
| Beyond Acceleration (s) | ≤10.5 | |||||
| Gradeability (°) | ≥18 | |||||
| fuel tank capacity（L） | 4.2L | |||||
| Trademark/Model | 1P54FMI | |||||
| Type | Single-cylinder, four-stroke, air-cooled | |||||
| Vehicle Parameters | Bore x Stroke（ mm） | 54×54 | ||||
| Displacement（mL） | 123.6 | |||||
| Compression ratio | 8.8 ：1 | |||||
| Maximum net power and corresponding speed （ kW/ | 6.2/7500（1±1.5%） | |||||
| Maximum torque and corresponding speed （ N · m/ | 9.2/5500（1±1.5%） | |||||
| Minimum no-load stable speed (idle speed)（r/min） | 1500±150 | |||||
| Minimum fuel consumption（g/（kW ·h）） | ≤354 | |||||
| Fuel type and grade | Gasoline 90# and above | |||||
| Lubricant grade | SJ 10W/40 | |||||
| Lubricant capacity（L） | 1.0L | |||||
| Lubrication method | Pressure, splash compound | |||||
| Clutch type | Manual wet multi-piece | |||||
| Transmission type | Engaged gears with 4-speed transmission | |||||
| Starting method | Electric/kick | |||||
| Ignition method | CDI | |||||
| Shift method | Four-speed cyclic | |||||
| Transfer method | Chain drive | |||||
| Transfer ratio | Sixth gear | Primary | 3.722 | |||
| First gear | 3.272 | |||||
| Second gear | 1.937 | |||||
| Third gear | 1.350 | |||||
| Fourth gear | 1.043 | |||||
| Component parameters | Carburetor Model or Specification | PZ20 | ||||
| Catalytic Converter Model or Specification | Without | |||||
| Spark plug model or specification | NGK DR8EA/TORCH-A7RTC | |||||
| Battery model or specification | 12V/6.5AH maintenance-free battery | |||||
| Air filter type | Foam filter | |||||
| Exhaust muffler system | Single | |||||
| Radio disturbance suppression method | Impedance | |||||
| Remark： Description of vehicle status | Front shock absorber | Hydraulic spring-type, non-adjustable, front reduction of the total length: 430mm, sleeve material: 45 steel, painted, compression resistance 12N,recovery resistance 71N, front reduction stroke: 90mm. fork tube for ¢ 26mm, sleeve outer diameter: ¢ 32mm. | ||||
| Rear shock absorber | Hydraulic spring type, manually adjustable , installation centre 345mm, compression resistance 29N, recovery resistance 757N, the number of spring coils: 13.5 circles, equal pitch, steel wire diameter: ¢ 8mm, stroke for: 75mm. | |||||
| Carburettor | PZ20, low-temperature start-up line damper. | |||||
| Handlebar | Handlebar diameter is 22mm, painted. | |||||
| Steering column lower coupling plate | Lower connection plate 35 steel forging. High strength. | |||||
| Fork | The flat fork is a steel square tube, combined welding, the flat fork around the spirit is more alive, no stuck, rear shock absorber performance is more comfortable. | |||||
| Rear brake pedal | Rear brake pedal with pedal cover | |||||
| Side bracket assembly | Inclined foot steel round pipe, folding aluminum alloy foot pedal | |||||
| 428H Chain | 428H 108 knots | |||||
| Pedal | Painted side pedal, easy to load | |||||
| Instrument | LCD instrument | |||||
| Rack | Aluminum alloy large shelf with backrest | |||||
| Remark： Description of vehicle status | Muffler | Main body and cylinder paint with painted shield | ||||
| Front and rear brakes | Front and rear with disc brakes | |||||
| Front and rear aluminum tyres | Front 1.4X17 disc/rear 1.6X17 disc | |||||
| Front and rear tyres | Front 2.50-17- Rear 2.75-17/ vacuum tyres | |||||
| Frame | Tube welded combination, high strength. The surface is finished with double paint | |||||
| Fuel tank | 4.2L | |||||
| Comprehensive introduction of selling points | The classic shape of the car, light and flexible, smooth lines, comfortable riding, economical and energy-saving, cost- effective, flexible and durable overcontrol, the engine is 125CC, special liquid crystal instrument, aluminum alloy large shelf with backrest, reliable performance, strong power, flexible shift, simple maintenance. The car seat height of 780mm, suitable for most drivers (height 1.65m- 1.9m), 165mm from the ground | |||||